Swing door is suitable for general industrial workshops, steel frame rooms, warehouses, transformer rooms and other buildings. It has better thermal insulation, strong wind resistance, less mechanical failure and durability. The following are its characteristics:

Industrial casement workshop door has beautiful style, anti-fouling, corrosion-resistant, durable, stable opening and closing, safety and reliability, convenient operation, etc. The unique process can better balance the weight of the door body and make the operation more convenient. Provide a variety of control systems, electric and manual operation methods are extremely convenient, the door leaf is flexible and lightweight, low noise, anti-theft, good wind resistance, can open small doors and windows, fully meet user requirements for door opening and closing.

Installation and commissioning:

1. The door leaf is erected in various parts of the opening to the required size, and the door leaf is kept vertical.

2. Initial spot welding of the upper and lower door shafts on the embedded part of the opening and the door leaf edge. When assembling, ensure that the upper and lower door shafts are on the same vertical line. Otherwise, the resistance of the door switch will easily damage the door shaft. In the case of no overturning, try to manually open and close the door leaf, it should be able to rotate flexibly without blocking, and then weld the door shaft firmly.

3. Install the electric door opener in place, and connect the connecting rod of the door opener to the door leaf. Install the electric bolt on the side of the door leaf, and adjust the door leaf to lock the door leaf.

4. According to the size requirements of the door, adjust the middle and surrounding sealing strips of the door leaf so that when the door leaf is closed, the gap can be tightly sealed by the tape.

5. The electric control box is installed in the room where it is convenient for maintenance. The installation of the door opener and the electric plug shall meet the requirements of the electrical installation regulations, and the protective ground wire shall be properly connected to ensure the safety of the equipment and personnel.

6. After checking that the relevant parts meet the requirements, turn on the power and press the control button, and then adjust the stroke switch repeatedly to ensure that the door can stop running after it is in place.